hard fault by Otomata Labs
. hard fault
. a raspberry pi pico 2 craptro
. 0t0mata labs 2o25
. at dihalt winter 2025
you wouldn't believe how powerful Cortex-M33 is
enjoy 1995ish demo vibes :D
everything runs at 320x240 RGB555 (16 bits per pixel) @ 60hz,
pixel doubled and displayed using HSTX unit via DVI output
first core runs the demo, seconds keeps the video and music running
the chip itself is _under_clocked to 126MHz to keep the 25.2MHz pixel clock
to run this prod, you'll need:
- a RP2350 microcontroller board (should work with both RP2350A and RP2350B)
- an DVI/HDMI breakout board and a display capable of receiving DVI 640x480 60hz signal
- currently, Murmulator 2 and Pico-DVI-Sock boards are supported
- and an I2S DAC to hear the music :)
quick pinout:
I2S DAC:
GPIO 9 - DATA
GPIO 10 - BCLK
GPIO 11 - LRCLK
DVI/HDMI:
pin name Pico-DVI-Sock Murmulator 2
Clock- 15 12
Clock+ 14 13
Lane0- 13 14
Lane0+ 12 15
Lane1- 19 16
Lane1+ 18 17
Lane2- 17 18
Lane2+ 16 19
+ debug UART at GPIO0/1
all code, "textures" and music by artÑmka (still pretty much known as wbcbz7)
end pic by grongy
greets to everyone at the party :)
special regards to Flux, polpo and murmulator dev group @ telegram
.06.01.2025
p.s. some bugs seem to be left unfixed (party version lol)[ back to the prod ]