pouët.net

Go to bottom
blury by Kuemmel [web]
[nfo]
screenshot added by Kuemmel on 2020-03-19 20:45:32
platform :
type :
release date : march 2020
  • rulez 4
  • is ok 1
  • sucks 0
popularity : 44%
 44%
  • rulez 0.80
alltime top: #29598
added on the 2020-03-19 20:45:32 by Kuemmel Kuemmel

popularity helper

increase the popularity of this prod by spreading this URL:

or via: facebook twitter pinterest tumblr

comments

...as I got a bit bored with x86 recently...some Risc OS promotion intro from me. A 832 byte intro for that operating system (Risc OS 5.24), tested on a Raspberry PI3 (should run on other Risc SO platforms, too, until they got a NEON capable CPU), including some bytebeat ported from my old DOS intro, running at 800x600. Check the ReadMe for more info...should serve more or less also as a tutorial if you want to code for that OS/ARM platform :-)

It's not an ideal platform for sizecoding (more OS interaction needed, every instruction 32 Bit,...) but lots of fun to code with the integrated BASIC assembler.

Youtube (cam capture) can be found here
added on the 2020-03-19 20:52:57 by Kuemmel Kuemmel
Corona, is that you?

;)
rulez added on the 2020-03-19 20:56:27 by HellMood HellMood
...I waited for that ;-) actually basic idea coded many months before...the only thing that should spread is Risc OS !
added on the 2020-03-19 21:01:22 by Kuemmel Kuemmel
Srsly, propz for the effort. 4 bytes for each instruction no matter what sounds horrible for sizecoding :D i have one of these PI 4 complete systems, i might prepare a card with risc OS and try your intro for real =)
added on the 2020-03-19 21:11:31 by HellMood HellMood
For RPI4 it's not fully ready, some obstacles with the USB drivers, but doable with some additional hardware and quirks. Check here for more information and downloads. Some Status on the port for RPI4 here
added on the 2020-03-19 21:22:03 by Kuemmel Kuemmel
what a surprise... platform thumb!
(why didn't use your hdmi capture hardware?)
rulez added on the 2020-03-19 23:25:36 by TomCatAbaddon TomCatAbaddon
:)
rulez added on the 2020-03-20 06:11:33 by sensenstahl sensenstahl
@TomCat: It didn't like the screenmode or frequency...I'll send you a private mail later...I wonder why it works for DOS at lower resolutions and not with the RPI...
added on the 2020-03-20 09:11:17 by Kuemmel Kuemmel
nice!

sadly my rpi is too old to support NEON instructions (v1.2 B+ --> ARMv6)

couldn't you have done part of the intro in Thumb mode, though?
rulez added on the 2020-03-20 16:13:14 by porocyon porocyon
...IIRC Risc OS doesn't support Thumb, of course would be shorter and may be doable, but also that full screen blur thing relies heavily on those NEON instructions...calculating 16 pixels per loop very easily and fast.
added on the 2020-03-20 19:37:42 by Kuemmel Kuemmel
@porocyon: Just a small correction here...meanwhile we found out that Risc OS acutally does support thumb mode :-)

Check out may be the first ever Risc OS thumb intro by Exoticorn => Link
added on the 2020-05-26 16:13:54 by Kuemmel Kuemmel

submit changes

if this prod is a fake, some info is false or the download link is broken,

do not post about it in the comments, it will get lost.

instead, click here !

[previous edits]

add a comment

Go to top