pouët.net

Go to bottom

Sample Grabber Pro v1.8 by Brutal PPE/PCE/PRO Coders

                Þ                     Þ                   Ý
                ÞÛÜ                   ÞÛÜ               ÜÛÝ
                ÛÛÛÛÛÛÛÛÛÛÛÛÜ ÜÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÛÜ ÜÛÛÛÛÛÛÛÛÛÜÜ
               ÞÛÛß    ÜÜÜ   ÜÜÜÜÜÜÜÜ ÛÛ      ÛÛ  ÜÜÜÜÜ    ßÛÛ
                ÛÛÜ   ßßßÛÛ ßßßßßßßß  ßß     ÜÛß ÛÛÛßßÛÛÜ    ÛÛ
     ßßßßßßßßßß  ßÛÛÛÛÜ  ÛÛ  ÜÛÛÛÜ  ÜÛÛÛÛÛÛÛÛß ÜÛÛÛ    ß  ßß ÛÛ ßßßßßßßßßß
                     ÜÛÛ ÛÛ ßß  ÜÛ Ûß ÜÜ         ÛÛ        ÜÛÛ
          ÜÜÛÛÛÛÛÛÛÛÛÛÛß  ßÛÛÛÛÛÛß    ÛÛ         Ûß ÜÜÛÛÛÛÛßß
          Þß                          ßÝ                 ßÝ

     ÄÄÄ Súaúmúpúlúe   Gúrúaúbúbúeúr   Púrúoúfúeúsúsúiúoúnúaúl   Vú1.8 ÄÄÄ

                        Copyright (c) 1994-1995 by Jay Dee.

                                 Ú ÄÍúContentsúÍÄ ¿
                           ³
                        ÄÄÍÎÄ þù  Important Note       Ä¿
                           º  þù  Disclaimer            ³
                           ³  þù  About                 ³
                           ³  þù  How to use SGPro      ³
                           ³  þù  System Requirements   ³
                           ³  þù  Questions & answers   ³
                           ³  þù  Copyright             ³
                           ³  þù  Distribution          ³
                           ³  þù  Contacts              ³
                           ³  þù  Greetings & Fuckings  º
                           ÀÄ þù  Next version preview ÄÎÍÄÄ
                                                        ³
ÕÍÍÍÍÍÍÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ--úÄÄÄÄÄÄÄÄú-ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÍÍÍÍÍ͸
|                                Important Note                                |
ÔÍÍÍÍÍÍÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ--úÄÄÄÄÄÄÄÄú-ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÍÍÍÍÍ;

   The  development  of this  software took  much money and time. So if You
   find this  utility  useful and You want to continue using it longer than
   1 (one)  week  evaluation  period You must  register it. For registering
   information refer  to  SGPRO.REG  Anyone  who  will  use  this  software
   longer than  two weeks  without  registering  will be considered to be a
   lamer!

   Remember: if You like the software - support the author!

   P.S. You can, moreover, You MUST upload this archive to ANY BBS You have
        access to.

ÕÍÍÍÍÍÍÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ--úÄÄÄÄÄÄÄÄú-ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÍÍÍÍÍ͸
|                                  Disclaimer                                  |
ÔÍÍÍÍÍÍÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ--úÄÄÄÄÄÄÄÄú-ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÍÍÍÍÍ;

   This  program  was  tested on several systems but I can't guarantee that
   it  is  free  of bugs. USE AT YOUR OWN RISK. I'm not responsible for any
   direct (or indirect) damage  caused by use (or misuse) of this software.

ÕÍÍÍÍÍÍÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ--úÄÄÄÄÄÄÄÄú-ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÍÍÍÍÍ͸
|                                 About SGPro                                  |
ÔÍÍÍÍÍÍÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ--úÄÄÄÄÄÄÄÄú-ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÍÍÍÍÍ;

   Sample  Grabber  Pro (hereafter  referred to as SGPro) is  a menu-driven
   program  capable of  playing  and  accurate extraction  of  samples from
   various music modules. (It seems to You that You  have already read this
   somewhere someday.. strange feeling :) Ripped  samples can than be  used
   in Your own productions, even if You don't have original composer.

   WARNING! Some samples are copyrighted by their owners! I cannot be  held
   responsible for any copyright violations.

   SGPro can  save samples in various formats like Amiga and PC RAW, Scream
   Tracker v3.x (ST3), Farandole Composer (FSM), Ultra Tracker (UWF), Digi-
   Traker (SPL), X-Tracker (DSF) and Fast Tracker v2.x (IFF)

   The main advantage  of SGPro among other rippers is an  ability  to play
   samples before You grab them. It doesn't, however, means that SGPro is a
   sample  player so  do not expect  extraordinary sound output quality. At
   least on devices others than GUS :)

   Module  file  formats  supported by  current version of this utility are
   listed below:

         ÉÄùÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÍÍÍÍùÍÍÍÍÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄùÄ»
         º  úFile Format Created Byú     úExtensionú    úSupportú  º
         º ÄÄÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÄÄ   ÄÄÍÍÍÍÍÍÍÍÍÄÄ  ÄÄÍÍÍÍÍÍÍÄÄ º
         ³                                                         ³
         ³ þ Chuck Biscuits and Black Artist  CBA      [x] Full    ³
         ³ þ Composer 669                     669      [x] Full    ³
         ³ þ Digital Sound Interface Kit      DSM      [x] Full    ³
         ³ þ Digital Tracker F030             DTM      [x] Full    ³
         ³ þ DigiTraker (upto v2.3)           MDL      [+] Partial ³
         ³ þ DigiTrekker                      DTM      [x] Full    ³
         ³ þ DMP File Converter (DSMI)        AMF      [+] Partial ³
         ³ þ Dynamic Studio PRO v1.0          DSM      [-] Detect  ³
         ³ þ Extreme's Tracker                AMS      [+] Partial ³
         ³ þ Farandole Composer               FAR      [x] Full    ³
         ³ þ Fast Tracker v2.x                XM       [x] Full    ³
         ³ þ Funk Tracker                     FNK      [+] Partial ³
         ³ þ Grave composer (aka MOD's Grave) WOW      [x] Full    ³
         ³ þ Inertia Module Editor            INR      [-] Detect  ³
         ³ þ Liquid Tracker                   LIQ      [x] Full    ³
         ³ þ MOD Editors Family               MOD      [x] Full    ³
         ³ þ MED v2.x                         MED      [-] Detect  ³
         ³ þ Multi Tracker                    MTM      [x] Full    ³
         ³ þ Oktalyzer                        OKT      [x] Full    ³
         ³ þ OctaMED                          MED      [-] Detect  ³
         ³ þ OMNI Player File Converter       GDM      [x] Full    ³
         ³ þ Poly Tracker                     PTM      [x] Full    ³
         ³ þ ProTracker Studio                PSM      [x] Full    ³
         ³ þ Purple Player File Converter     DPP      [x] Full    ³
         ³ þ Scream Tracker v2.x              STM      [x] Full    ³
         ³ þ Scream Tracker v3.x            S3M/S3X    [x] Full    ³
         ³ þ Sound Club                       SN       [-] Detect  ³
         ³ þ Sound Wave Pro                   CDM      [-] Detect  ³
         ³ þ Ultra Tracker v1.3-1.6           ULT      [x] Full    ³
         ³ þ UNIS669                          669      [x] Full    ³
         ³ þ X-Tracker                        DMF      [+] Partial ³
         º ÄÄÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÄÄ º
         º                     Total 31 trackers                   º
         ÈÄùÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÍÍÍÍùÍÍÍÍÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄùļ

   NOTE: Not  all  files  carrying .PSM extension are fully compatible. You
         will be unable to load some incompatible .PSMs into Sample Grabber
         Professional.

   NOTE: MOD's Grave files can be  recognized ONLY by .WOW extension, so do
         not rename these files.

   NOTE: Currently SGPro only supports .MDLs, .DMFs and .AMSs with unpacked
         samples.

   NOTE: ULT pattern depacking routine is veeeeeeeryyyyyyy slooooooow..

   NOTE: SGPro was tested with CBA files from ExpOZe music disk but as long
         there are no official fileformat specs, SGPro may  be incomptaible
         with other files..

   HINT: .AMF/.AMS modules CAN be processed if You specify an offset of the
         first sample in file as a second command line parameter. Gonna fix
         this someday..

ÕÍÍÍÍÍÍÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ--úÄÄÄÄÄÄÄÄú-ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÍÍÍÍÍ͸
|                               How to Use SGPro                               |
ÔÍÍÍÍÍÍÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ--úÄÄÄÄÄÄÄÄú-ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÍÍÍÍÍ;

   The usage of this menu-driven  program is very easy (and i guess You all
   already know this :), so You shouldn't have any problems, but still here
   is a short guide.

   Once  You've  made  up  Your  mind  about the module You want to extract
   samples  from,  just  type  at the  DOS  prompt: SGPRO.EXE filename.ext,
   filename.ext  is  the  name  of  Your  module. There are no command line
   options  available.  Also  note that for practical reasons wildcards are
   not allowed, too.

   First  thing  SGPro does is Sound Blaster detection. It searches through
   all  possible  SB  addresses  ($210-$260). In  case SB was not detected,
   SGPro  will try to find a Gravis UltraSound (lateron referred to as GUS)
   and if it will fail agian then SGPro will try to output sound to DAC  at
   LPT1:. In case of successful SB/GUS detection You should hear a pop.

   Next   SGPro  validates  the specified file. If Sample Grabber Pro finds
   Your  module  to be valid, it  will load sample descriptions. This might
   take  a  little  (the time depends much on module type - the major time-
   wasters are .ULTs and .PSMs, so don't worry if it takes minutes to  load
   samples from ULT on Your grandma's AT 12MHz :). After that You will  see
   the main screen. The SGPro outlook changed after version 1.2, so now all
   You will see a FULL-screen sample  selector. The  first field is  sample
   number, then there is  sample name. Then there is a field that tells You
   about sample format: it can be 16Bit, 8Bit or AdLib (FM) sample. 'AdLib'
   string  in this  field means  that You have  just loaded .S3M with AdLib
   samples. These samples  can not be  played within  SGPro - You must save
   sample to  disk first  and then load  it into ST3 to hear it. (Also note
   that AdLib samples are ALWAYS saved in ST3 format.) Then there is a very
   important  field - Sample  Length. If it is  empty this means  that this
   sample  is not saved  in module and  You will  never  hear it. Next  two
   fields show You Repeat Starting and Repeat  Ending  points. And  finally
   the last field shows the speed of middle C note. With SGPro v1.7 You can
   increase/decrease this value by pressing +/- keys. This is equivalent to
   playing sample in one octave higher/lower. (Note that the higher rate  a
   sample has - the lower playback quality  You will get on devices  others
   than GUS and Covox). At the bottom of the screen there is a  status line
   telling You what fileformat will be used for saving samples,  what sound
   device will be used for sound output and current system status.

   Once You  saw  this amazing desktop,  use cursor-up and cursor-down keys
   to  select  the  sample.  Then press  a key from Q to U to hear how this
   sample sounds. With SGPro v1.5 and above You can play sample in reversed
   form. Just hold down ONE of  shift-keys and a key from the above  range.
   Pressing + and - keys will increase and decrease base speed of a sample.
   The sound output device is selectable via F3. Only one sample is  stored
   in  memory  at a time, so there may be a short delay  before SGPro plays
   sample for the first time. Samples are ALWAYS  played on maximum  volume
   so it is highly  not  recommended to listen  samples with  headphones on
   maximum volume.

   With SGPro v1.0 and above You can always redescribe samples - just press
   ENTER on sample You wanna describe. (This feature WON'T work with unused
   samples.) This feature was added because many  module writers use sample
   names to  enter song  messages.. So  now You can  enter more  meaningful
   description  You want to use. This is  only useful  when You are  saving
   sample in ST3 format as long as others do not  support any sample info..
   Sample name field length is limited to 28 chars in ST3, so You may enter
   as long description as You wish, but ST3 will use only 28 first chars in
   any case. Also  note that  changes You  made will NOT be  written to the
   module being processed. BTW: Pressing ESC when entering description will
   cancel the changes made.

   When You have found the sample You  want to extract press F2, when it is
   under  cursor. Status  line should  read 'Saving  sample' (If it doesn't
   then take a GOOD  look at Sample Length. Maybe the sample is  unused? :)
   With SGPro  v1.5 and above  You can hold down ONE of  Shift-keys to save
   sample in reversed form.

   Sample can be saved in ST3 fileformat, Amiga (signed) RAW, PC (unsigned)
   RAW, Farandole Composer, X-Tracker, DigiTraker and Ultra  Tracker sample
   formats. The file type is selectable via F4. Samples are saved  to  disk
   using filenames like filename.xxx where xxx is the number  of  sample in
   module  and  filename  is the  name of file  specified  at startup.  For
   example: You  started SGPro  with the  following command line: SGPRO.EXE
   JD-BODY.S3M, the sample #4 then will be saved  as JD-BODY.4  Easy,  huh?
   This was done to avoid confusion between samples  from different modules
   saved  in one directory.  Samples  are  saved in last  selected (via F4)
   format, so  You  shouldn't  use  F4-F2-F4-F2-etc  to save  samples, just
   F4-F2-F2-F2 :) Also in SGPro v1.5 and above the information about output
   fileformat is saved in executable file (SGPRO.EXE) so that the next time
   You  start SGPro it will  automatically configure  itself to the  output
   format You used last, so that You shouldn't select it once again.. Note,
   that  You  should NEVER  try to re-compress the executable, otherwise it
   will never start..

   In case of any error the status line will read 'Error saving sample..'

   With SGPro v1.6 and up You can read the in-song message, without leaving
   Sample Grabber Pro. Just press F9  key to enter in-song message  viewer.
   To scroll message use Up  and Down keys.  If You wanna dump the  message
   to disk, just press F2. Note, that this function shows a MESSAGE, if the
   processsed file is one of the following types: ULT, 669, MTM, DMF & MDL.
   If all other cases You will see a formatted samples list. This was  done
   because  many  composers use samplles names  to write messages, if their
   favourite tracker doesn't have message editor..

   And here comes a quick keyboard reference:

   þ ESC             -- Quit
   þ F1              -- No elp is available since v0.9 Read dox CAREFULLY!
   þ F2              -- Save
   þ F3              -- Select sound device
   þ F4              -- Select output file format
   þ F9              -- View in-song message. Keys available in this mode:
     þ                -- Scroll message up
     þ                -- Scroll message down
     þ F2              -- Save message to disk
     þ ENTER, ESC, F10 -- Quit message viewer
   þ F10             -- Quit
   þ                -- Move cursor up (and what You expected? :)
   þ                -- Move cursor down
   þ PageUp          -- Move cursor up 20 rows
   þ PageDown        -- Move cursor down 20 rows
   þ ENTER           -- Edit sample text. Keys available in this mode:
     þ                -- Move cursor to the end of the sample text
     þ                -- Move cursor to the start of the sample text
     þ ESC             -- Quit and restore the previous sample text
     þ ENTER           -- Quit and use entered sample text
   þ Space           -- Play sample (Middle C)
   þ Q-U             -- Play sample (Middle C-B)
   þ +               -- Double sample's C2Spd (one octave up)
   þ -               -- Halve sample's C2Spd (one octave down)

   Since version 1.2 the  command  line  version of SGPro was added to help
   You to  extract  all  samples from  module  FAST! This  utility  will be
   updated as  often as main  program. Command  line version can run on any
   hardware configuration, so if You  fail to run standart SGPro, try  this
   before You start complaining :)

ÕÍÍÍÍÍÍÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ--úÄÄÄÄÄÄÄÄú-ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÍÍÍÍÍ͸
|                            Hardware requirements                             |
ÔÍÍÍÍÍÍÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ--úÄÄÄÄÄÄÄÄú-ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÍÍÍÍÍ;

   Processor : You must have  at  least  286 processor to run main program.
               (Sorry poor 8086 users. The  only choice for You is  command
               line version of SGPro..) Also note  that for better  results
               do not use any protected  mode software - this is the way to
               incorrect SB output  and possible lock-ups.. PM won't affect
               Covox/GUS playing in any way, but still there is a chance of
               lock-ups..

   Video Card: Version  1.0 and  up will  run on  any video  card. It  uses
               standard  80x25 alpha  video mode. On CGA and MDA cards  the
               screen will look weird but still You can  understand  what's
               going on.. also you may try to use command  line  version of
               SGPro, but better buy a VGA, man! :)

   Audio Card: It is recommended (but not  necessary  if You only  wish  to
               save  samples, but how are You gonna  compose music then? :)
               that You have a Sound Blaster compatible card, UltraSound or
               DAC on LPT1 (aka  Covox) in  order to play  samples. You can
               also play samples  on internal PC  speaker.  However this is
               HIGHLY not recommended, because of low sound quality.

   Memory    : Sample Grabber Pro itself needs about 50k and it allocates a
               130k buffer in base memory (NOT XMS or EMS!) for  it's needs
               at start-up. The program woun't run if less than that amount
               of memory is available. Command line version needs only  65k
               of system memory to run.

ÕÍÍÍÍÍÍÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ--úÄÄÄÄÄÄÄÄú-ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÍÍÍÍÍ͸
|                             Questions & Answers                              |
ÔÍÍÍÍÍÍÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ--úÄÄÄÄÄÄÄÄú-ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÍÍÍÍÍ;

   Q: Exactly why do You  want me to use  Sample Grabber PRO, not something
      else?
   A: Easy. Just imagine You wanna grab samples. To do this You  must  have
      a composer the  track was composed in. Now imagine how many different
      trackers are used now? Right.  All of them will eat PLENTY of Your HD
      space. And  when using SGPro all You need is ~20k for .EXE file, that
      supports all (atleast most of) popular trackers. Got the  difference?
      And have You ever seen a music-oriented utility on PC which  supports
      SO many fileformats? Me - NOT!

   Q: The sound from the PC speaker is awful (too noisy). What can i do?
   Q: Machine  is  hanging  up  when  I'm  trying  to play sample at a high
      frequency rates. What's wrong?
   Q: Machine  is  sometime  hanging  up when i'm playing sample on rapidly
      changing speeds. Is it Ok?
   A: DUDE! This  utility is NOT a  sample player - this is Sample  Grabber
      and it  serves its main aim - allows You to  GRAB  samples, so do not
      blame me for paying such little attention to playing routines. May be
      in some ditant future i will implement a cool sound routine but right
      now.. buy a GUS, man! SGPro works COOL with it!

   Q: AdLib samples are not played. Is it Ok?
   A: Sure  it  is :)  Just  save  the  sample  and load it in ST3 to hear.

   Q: What's wrong with GUS support?
   A: SGPro fully supports  this  ultimate sound card - Gravis Ultra Sound.
      But under some specific conditions You may experience some troubles..
      After running some players/editors (i.e.  after  XTC-Player). You may
      need to run ULTRINIT.EXE, supplied with the card.

   Q: When i press both shift-keys and a notekey i hear nothing. What's up?
   A: Read manual carefully! It says that You must press ONE shift-key, got
      it? I don't know  (to be honest - don't even  care :) whether this is
      SGPro bug or not..

   Q: Does SGPro run under MS Windows?
   A: Yes  it  works fine until You try to play sample - You'd better press
      CTRL-ALT-DEL immediately to skip all the unpleasant sound :)

   Q: How can I support Your work?
   A: Just send me a letter with inclosed $15 or so and that will do.

   Q: How can I please the author?
   A: You know.. there are many ways.. :) but it will be great if You  send
      me a letter (look  some lines up) or  atleast a  postcard with a nice
      view to Your city.. (You know, my girlfriend loves postcards :)

   Q: Exactly how can I contact the author?
   A: :) Read the contacts section.

   Q: Why should I contact You?
   A: Heh, this one is easy - contact me just for fun! :) Or maybe You have
      something urgent to tell me?

   Q: Is there any way to get rid of that annoying delay in the end?
   A: Well.. Kinda.. EASY way to do it.. Think for yourself, man!

ÕÍÍÍÍÍÍÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ--úÄÄÄÄÄÄÄÄú-ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÍÍÍÍÍ͸
|                                  Copyright                                   |
ÔÍÍÍÍÍÍÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ--úÄÄÄÄÄÄÄÄú-ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÍÍÍÍÍ;

   This  program  was  written   by Jay  Dee [aka Vladimir  Sopot]  and  is
   protected by  international  copyright laws.  Any use in  commercial way
   without  written  permission from the  author is prohibited. All  rights
   reserved. Portions copyright by TBH-Softworx.

ÕÍÍÍÍÍÍÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ--úÄÄÄÄÄÄÄÄú-ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÍÍÍÍÍ͸
|                                 Distribution                                 |
ÔÍÍÍÍÍÍÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ--úÄÄÄÄÄÄÄÄú-ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÍÍÍÍÍ;

   This program is distributed on Shareware basis. That means that You have
   7 days to decide if You will  continue using this utility or not, and if
   You  decide to use this  software  longer You must  register it with the
   author. Read SGPRO.REG for additional info on registering.

   The  original  archive  package  should  contain  the  following  files:

   þ SGPRO.EXE     The main program
   þ SGPROCMD.EXE  The command line version
   þ SGPRO.DOX     This documentation
   þ SGPRO.HST     Revision history file
   þ SGPRO.REG     Registration file
   þ FIlE_ID.DIZ   BBS description

   These files MUST  be inside the archive. If any of them are missing then
   You  probably got a damaged archive and  possibly a virus in it. Beware!

ÕÍÍÍÍÍÍÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ--úÄÄÄÄÄÄÄÄú-ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÍÍÍÍÍ͸
|                                   Contacts                                   |
ÔÍÍÍÍÍÍÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ--úÄÄÄÄÄÄÄÄú-ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÍÍÍÍÍ;

   You can contact me for any reason at:

   Mail: Moscow, Russia, 117279
         Ostrovityanova str, 37A-117
         Vladimir Sopot [Jay Dee]

   You can always call any board where You can find my name and  leave me a
   message, but before You do this check if i called this board lately..

   NOTE for hardware manufacturers: if You want  me to  support  Your audio
        card feel free to provide me with technical info and/or hardware.

   NOTE for software developers: if You want me to  support Your tracker or
        whatever, feel free to provide me with software and technical info.

   NOTE for ShareWare  libraries developers/distributors: this software MAY
        BE NOT  distributed on  any kind of  media without auther's written
        permission. Contact me if  You want to  get one. You  know i  wanna
        have some money, too :)

   NOTE for ANYONE: if You own a  copy of file format  description i do not
        support and/or You have a program that outputs files of that format
        please send it to me. Your help in the development of this software
        will be highly appreciated.

ÕÍÍÍÍÍÍÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ--úÄÄÄÄÄÄÄÄú-ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÍÍÍÍÍ͸
|                             Greetings & Fuckings                             |
ÔÍÍÍÍÍÍÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ--úÄÄÄÄÄÄÄÄú-ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÍÍÍÍÍ;

   If You consider yourself being cool, consider yourself being greeted.. I
   don't wanna greet anyone particular now..

   Fuckings go out to everyone who use this utility and haven't registered!
   Due to Your lame behavier i will not release any more bugfixed  versions
   of SGPro. Trust me - i know who You are!

ÕÍÍÍÍÍÍÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ--úÄÄÄÄÄÄÄÄú-ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÍÍÍÍÍ͸
|                             Next Version Preview                             |
ÔÍÍÍÍÍÍÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ--úÄÄÄÄÄÄÄÄú-ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÍÍÍÍÍ;

   If You care about the future it doesn't mean i must do it, too :) Better
   send me Your suggestions and we'll see how to make SGPro better..

ÕÍÍÍÍÍÍÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ--úÄÄÄÄÄÄÄÄú-ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÍÍÍÍÍ͸
|                         LET THE SAMPLE BE WITH YOU!                          |
ÔÍÍÍÍÍÍÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ--úÄÄÄÄÄÄÄÄú-ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÍÍÍÍÍ;
Go to top