pouët.net

Go to bottom

Second Reality (Amiga AGA port)

Second Reality - unofficial Amiga AGA port
==========================================

Future Crew's PC demo "Second Reality" (Assembly 1993), ported to the
Amiga 1200 / AGA from the original source code released in 2013.
This is an unofficial fan port; see LICENSE.txt.

Original demo by Future Crew (code: Psi, Trug, Wildfire; graphics:
Marvel, Pixel, Skaven; music: Purple Motion, Skaven). The port is
released under the Unlicense, like the original source.
Source: https://github.com/110-kenichi/SecondReality-AGA

Requirements
------------
- Amiga with AGA chipset (A1200 / A4000), Kickstart 3.1
- 2 MB Chip RAM and Fast RAM (tested with 8 MB)
- CPU 68030 or better recommended (68020 works but heavy parts are slow;
  68060 supported - the build avoids instructions the 060 traps)
- PAL display (50 Hz). NTSC is not supported: music and timing would be
  wrong.

Files
-----
  m2.exe          the demo
  m2.exe.info     Workbench icon
  data/           graphics, music and other data (must stay next to m2.exe)
  LICENSE.txt     licence and credits
  readme.txt      this file

Installing / running
--------------------
Copy m2.exe, m2.exe.info and the data folder into any folder on your
hard disk and start m2.exe from the Shell or by double-clicking the
icon. Data is loaded from PROGDIR:data/.

Controls
--------
  Left mouse button   quit
  Right mouse button  skip to the next part

Known limitations
-----------------
- Speed depends on the CPU. Parts may run with fewer frames per second on
  slower machines; music stays in time.
- Screen is 320x256 PAL; most parts are shown at the original 320x200 in
  the middle of the screen.
- Profiling: create data/prof.cfg (any content) to write per-part timings
  to data/prof.txt when the demo exits.
- Triple buffering: create data/triple.cfg (any content). Parts that take
  a little more than one frame to draw run faster, but the frame interval
  is less even. Double buffering is the default.
- With triple buffering, data/predict.cfg (any content) times each frame
  by the frame it is expected to appear on. Off by default.

Download: https://github.com/110-kenichi/SecondReality-AGA/releases
Go to top