pouët.net

Go to bottom

Random line of code thread

category: code [glöplog]
Code: move.w d3,bltcon1(a6) or.w #$0f00+((Ablt&Bblt~Ablt)|(~Ablt&Cblt)),d3 move.w d3,bltcon0(a6)
Code: move.w #.c_step*LINESTRIDE-LINEWIDTH,$060(a3) move.w #.b_step*LINESTRIDE-LINEWIDTH,$062(a3) move.w #.a_step*LINESTRIDE-LINEWIDTH,$064(a3) move.w #LINESTRIDE-LINEWIDTH,$066(a3)
added on the 2018-02-02 00:32:34 by Blueberry Blueberry
Is this checkerboard code?
added on the 2018-02-02 12:32:41 by rloaderro rloaderro
Quote:
Is this checkerboard code?

It is.
added on the 2018-02-02 15:31:43 by Blueberry Blueberry
createSpecialSin
; a0 = table sinus de n element
; a1 = reftablesinus
; a2 = buffer resultat
; d0 = pas interne
; d1 = nombre de copie de valeur
; d2 = nombre n d'element de la table sinus
; retour = d1 : nombre de memoire occupé sur buffer resultat

movem.l d0-d7/a0/a1/a3-a6,-(sp)
move.w d2,d3
lea bufferFlag1540,a3
subq #1,d3
.clrflag
clr.b (a3)+
dbra d3,.clrflag

move.w d2,.auto1+2
move.w d2,.auto2+2
move.w d2,.auto3+2
move.w d2,.auto4+2
move.w d2,.auto5+2
move.w d2,.auto6+2

move.w d2,d3 ; 512 ou 1024
subq #1,d3 ; 511 ou 1023 pour le and de l'angle

lea bufferFlag1540,a3
subq #1,d2 ; 511 ou 1023 iteration
moveq #0,d4 ; angle
.loop
tst.b (a3,d4) ; flag a 1 ?
bne.s .flagA1
.flagA0
move.w d4,d5
add d5,d5
move.w (a0,d5),(a2)
add d5,d5
move.l a2,(a1,d5) ; a2 referencer en reftable+angle*4
addq.l #2,a2
st (a3,d4) positione flag(angle) a 1
add d0,d4 ; pas interne
;and d2,d4 ; mod 512 ou 1022
.auto1
cmp.w #1540,d4
blt.s .1
.auto2
sub.w #1540,d4
.1

bra.s .loop
.flagA1 ; copier d1 fois les valeurs suivante
move.w d4,d5 ; angle courant copier sur d5
move.w d1,d7
subq #1,d7
.cpy
move.w d5,d6
add d6,d6
move.w (a0,d6),(a2)+
add d0,d5
.auto3
cmp.w #1540,d5
blt.s .2
.auto4
sub.w #1540,d5
.2
;and d2,d5
dbf d7,.cpy

;sub d0,d4
addq #1,d4
.auto5
cmp.w #1540,d4
blt.s .3
.auto6
sub.w #1540,d4
.3
;and d2,d4
tst.b (a3,d4)
;bne.s .fin
beq.s .flagA0
.fin
movem.l (sp)+,d0-d7/a0/a1/a3-a6
rts
added on the 2018-02-04 02:54:41 by gloky gloky
Code: addq.w #1,d3 ; journey is over, this char has reached its destination
added on the 2018-02-15 13:35:57 by StingRay StingRay
Code: delegate Func<TIn, TOut> Recursive<TIn, TOut>(Recursive<TIn, TOut> r); static Func<TIn, TOut> Y<TIn, TOut>(Func<Func<TIn, TOut>, Func<TIn, TOut>> f) { Recursive<TIn, TOut> rec = r => a => f(r(r))(a); return rec(rec); } ... var fibo = Y<int, int>(f => n => n < 2 ? 1 : f(n - 1) + f(n - 2)); ...
added on the 2018-02-15 17:48:26 by Orace Orace
Just create me. Then give me a ref to myself, I will give it to myself.
added on the 2018-02-15 17:50:08 by Orace Orace
Code:bra.w *+$a0e-$112-6-2
added on the 2018-02-23 10:09:58 by StingRay StingRay
Code:move.w #$800+$112+AckCOP-Crack,(a1)
added on the 2018-02-23 10:23:30 by StingRay StingRay
Code:move.w #PatchGame-BOOT-$190-$2c00-$1c-2,$190+2(a5)
added on the 2018-02-23 14:47:59 by StingRay StingRay
Code:assign jump_offset = {{11{instruction[31]}}, {instruction[31], instruction[19:12], instruction[20], instruction[30:21]}, 1'b0};
added on the 2018-02-23 15:56:30 by ferris ferris
Code:move.w #$6000+$d6-($b6+6)-2,(a1) ; bra.b .nodrive
added on the 2018-02-26 10:13:32 by StingRay StingRay
Code:ninja -C out/ReleaseX64 -j1000 all
added on the 2018-02-26 10:41:25 by Blueberry Blueberry
Code:move.w #$4e75,(a1) ; rte -> rts, we call VBI code directly
added on the 2018-03-01 12:50:29 by StingRay StingRay
Code:std::chrono::steady_clock::time_point end = std::chrono::steady_clock::now() + std::chrono::duration_cast<std::chrono::milliseconds>(std::chrono::duratio n<double>(seconds));
added on the 2018-03-01 13:38:15 by KeyJ KeyJ
Code:// GS Drum Kit uint8 chn = xg[5] & 0x0F; if(chn == 0) chn = 9; else if(chn < 10) chn--; drumChns.set(chn, xg[7] != 0);

Lovely standards.
Code: glPushMatrix(); glTranslatef(0.f, 0.f, -2.25f); glRotatef(rot*7.f,1.0f,0.0f,0.0f); // Rotate On The Y Axis glTranslatef(-Centroide[0], -Centroide[1], -Centroide[2]); // Center On X, Y, Z Axis
added on the 2018-03-01 14:12:05 by Xyl2k Xyl2k
Code:SYNC_DATA::data[SYNC_DATA::sync_data[i].track][SYNC_DATA::sync_data[i].time] = SYNC_DATA::sync_data[i].value;

What do you need using namespace for, anyway?
added on the 2018-03-03 02:41:02 by TBit TBit
Code: move (a0)+,d0 add (a1)+,d0 add (a4)+,d0 move.l d0,a6 move.w (a6)+,a5 move (a6),d3 move (a2)+,d1 add (a3)+,d1 move.l d1,a6 add (a6),d3 move.l (a5),a6 move.w d3,(a6) or.w move.w d3,nbbob*4+8(a6) or.l addq #4,(a5)
added on the 2018-03-09 07:59:49 by gloky gloky
at the end, change into:
Code:move.l (a5),a6 move.l d3,(a6)+ move.w d3,ofs(a6) move.l a6,(a5)

and gained 1 nop
added on the 2018-03-09 08:59:12 by gloky gloky
Code:move.w #(280*2)<<6|(688/16),$58(a6)
added on the 2018-03-10 09:51:01 by StingRay StingRay
Code:enum GLTFComponentType { Byte = 5120, UByte = 5121, Short = 5122, UShort = 5123, // yes, Int(5124) is missing from the spec for... reasons. UInt = 5125, Float = 5126, }
added on the 2018-03-20 18:07:49 by kb_ kb_
Code: class DemoPartyListByCountry(generic.ListView): template_name = 'parties/demoparty-list.html' model = DemoParty def get_context_data(self, **kwargs): ctx = super().get_context_data(**kwargs) ctx['country'] = self.kwargs.get('country') return ctx def get_queryset(self): return self.model.objects.filter(country__iexact=self.kwargs.get('country')). order_by('date_start')
added on the 2018-03-20 18:24:13 by T-101 T-101
Code:move.l #$7cff4e75,$d8cb0-$d7994(a0) ; completely disable manual protection
added on the 2018-03-20 18:53:20 by StingRay StingRay

login

Go to top