platforms with no productions
category: general [glöplog]
Awesome finds, people! Yep, as Charlie says, a very redundant machine - but why not just for the fun of it. I also second dodke's opinion, it could be a fixed-hardware platform like the A500 is handled (and that with good reason), which is generally very un-Amiga (with its many possible configurations). A middle ground between A500 and brutalist 060 AGA. CD32 as another label for vanilla 1200. And everybody could watch the (patched or not) CD32 stuff on a normal AGA machine for convenience.
OK, not to hijack the thread, with exhibit A and B, the CD32 is off the list ;D
OK, not to hijack the thread, with exhibit A and B, the CD32 is off the list ;D
68kmac + morphos
they made a functioning 16-bit computer in minecraft does that count?
https://www.youtube.com/watch?v=fYIBlJmNwTE
https://www.youtube.com/watch?v=fYIBlJmNwTE
btw where to obtain some info about Thomson MO5 ?
I have some english docs for Thomson things at http://pulkomandy.tk/wiki
I feel I am an idiot :\ just managed how to access
writing 1 to $A7C0 gave an access to bitmap memory (wrote $AA to 0)
0 - is color data ($32)
Code:
; Disable interrupts
ORCC #$50
lda #$AA
sta 0
inc $A7C0
lda #$32
sta 0
dec $A7C0
writing 1 to $A7C0 gave an access to bitmap memory (wrote $AA to 0)
0 - is color data ($32)
Yes, but using INC/DEC is a bit unsafe if you don't know what state you start in. Well, you'll easily see if there was a problem with that, as the border color will change :) (it's the next bits in the register)
@ PulkoMandy, how to create tape image .k5?
I used f2k5, got file.k5
When I type LOADM"",&H6000, I see no data at address.
I used f2k5, got file.k5
When I type LOADM"",&H6000, I see no data at address.
Well, it works for me. Your binary needs to have valid DECB headers however, f2k5 does not add them and does not check they are there. I use lwtools assembler, "lwlink --decb" can generate the needed header (same format as on Tandy machines).
When the header is correct you only need LOADM"",,R to load and run your code.
Sample here: https://github.com/pulkomandy/thomson/blob/master/code/C/F14/Makefile
When the header is correct you only need LOADM"",,R to load and run your code.
Sample here: https://github.com/pulkomandy/thomson/blob/master/code/C/F14/Makefile
(: lwlink crashes on my computer(:
I think what simple solution is to load binary via debugger and CSAVE memory to tape
I think what simple solution is to load binary via debugger and CSAVE memory to tape
(maybe we should move this discussion elsewhere, as there are already productions for Thomson MO5, by the way...)
Memotech MTX?
https://www.youtube.com/watch?v=gSA-5gS58qg
https://www.youtube.com/watch?v=gSA-5gS58qg
bandai rx78
p/ece
p/ece
