pouët.net

Go to bottom

3D Printed DUCK.3DS

category: offtopic [glöplog]
A pouet pig would be awesome :)
added on the 2013-10-12 14:12:04 by xeron xeron
sandstone? how big is it?
added on the 2013-10-12 14:27:30 by xernobyl xernobyl
Accuracy and resolution of objects depends on the type of extruder and assembly quality of printer. Everyone usually goes by layer height. Factors for resolution on a Prusa i3 using Magma Nozzle:

00.05 mm layer height on high
15.00 mm mechanical resolution X
15.00 mm mechanical resolution Y
00.80 μm mechanical resolution Z
03.00 mm filament diameter
00.40 mm nozzle diameter

more duck pr0n:

BB Image

@Exin: I had to make the bottom part of the duck filled and flat. I edited all vertexes on the bottom to be the same Z.

@Inopia: duck.stl

Where to download the pouet pig 3D model?
from here (I think it's complete)...
added on the 2013-10-12 22:50:31 by FunGas FunGas
Nice thread. I just made a pig just for fun.
There are no textures. Just the triangulated shape prepared to print in pink.
BB Image
BB Image
download here
added on the 2013-10-13 01:14:50 by ham ham
Note that DeadDeer supports the .STL format and have a function of nurbs from any mesh to fully rounded mesh.
http://deaddeer.free.fr/
added on the 2013-10-13 10:32:09 by Bartoshe Bartoshe
All chessboard pieces in Crystal Dream 2.
added on the 2013-10-13 19:35:28 by rudi rudi
xernobyl: about 20 cm
added on the 2013-10-14 09:22:52 by jaw jaw
BB Image
added on the 2013-10-14 11:15:54 by Inopia Inopia
Voxelduck!
added on the 2013-10-14 15:23:01 by ham ham
there's a better pouet pig model done by nanook/roman cortes, iirc!
I have a version of the original 3D pouet pig here, but I am sure there was a version of this with more polygons. I think it came from the 'origins of the pig' thread.
added on the 2013-10-15 01:06:30 by fizzer fizzer
It was posted here originally, but the download is now gone.
added on the 2013-10-15 01:24:06 by fizzer fizzer
Here we go:
BB Image
Printed using glow-in-the-dark PLA, with a flashforge 3d printer. Shortly after i took this photo I accidentally dropped the pig and it the pigtail broke off, GRAH. :)

There's still some leftovers visible from the supporting structures, as I printed it tail-first, looking upwards, with full exterior support. The mouth came out really nice this way:
BB Image
added on the 2013-10-16 00:24:28 by red red
Awesome! =D
added on the 2013-10-16 00:42:27 by fizzer fizzer
Nobody wanna print my pig? OK. First and last.
added on the 2013-10-16 01:06:50 by ham ham
what about painting it using spray paint ?
added on the 2013-10-16 09:58:31 by Tigrou Tigrou
fabulous! :D
added on the 2013-10-16 10:10:56 by raizor raizor
@Inopia: cool duck. What printer did you use?

Thanks everyone for all the pig 3D models! I can definitely use them for demo purposes.

@red: Nice pig. The one i had printed didn't come out as good as yours, but will be stepping up the game with smaller nozzle and PLA plastic. The tail and the ears snapped off.

BB Image

@cosmicollie:

BB Image
BB Image

@Tigrou: acrylic spray paint on order.

more duck:
BB Image
"Create a 3D life with full pleasure"

WTF? :)
added on the 2013-10-16 11:26:01 by gloom gloom
Luis: your prints look pretty good nevertheless. I think I printed the pig a tad bigger than you, and the ears are pretty fragile here too. What software are you using for printing? Your support structure looks different from what my version of ReplicatorG/Skeinforge generates.
I'm also still fighting with warping, putting hairspray on the heatbed helps a bit (if you dont mind the mess and the fumes), I yet have to test kapton tape.
added on the 2013-10-16 14:05:00 by red red
Hi Luis,

wow - it´s exciting to see the ghoul 3d printed. thank you for sharing the photos of it.
i hope you enjoy the figure :)

as a little "thank you" i quickly modelled a keyring - get it here and feel free to use it
if you like:

https://dl.dropboxusercontent.com/u/7056586/trsi_keyring.zip

cu

cosmic
@luis: it's a prusa mendel a colleage and I built. It's not very accurate but it works. We use it mainly to print parts for embedded systems like enclosures and whatnot :)
added on the 2013-10-17 18:56:11 by Inopia Inopia
@cosmic: Thanks for that keychain model. I will print it in metal and save you one.

BB Image

The background art is Duck Meet CHRMFACE by Dice

login

Go to top